The Primacoustic MaxTrap is a combination full range absorber and diaphragmatic resonator designed to control all frequencies right down to the deepest bass.

This is achieved by combining a full-size high density glass wool panel (F) with a closed air space behind (B) created by the wood frame (A) to absorb sound below 100Hz. Lower frequencies pass through the front face and then cause the internal diaphragm (D) to resonate. The greater energy contained in low frequencies causes the limp-mass diaphragm to naturally migrate to the frequencies where room resonance is most prominent, thereby reducing the effect of powerful room modes.

Made from easy to clean black melamine coated wood composite frame (A), the MaxTrap ships flat in kit form to save freight costs and assembles in about fifteen minutes using standard household tools. Once together, the device hangs easily in the corner using supplied French cleats.

The MaxTrap may be ordered in a choice of black, grey or beige fabric covering to suit most color schemes.

 

 

MaxTrap-EXPLODED
maxtrap-dimensions
Frame Material Black melamine laminated MDF
Dimensions 24” (610mm) x 48” (1219mm) x 19” (See detail dimensions)
Panel Material Formed, semirigid inorganic glass fibers; Density 6.0 lbs. pcf. (96 kg/m3)
Fabric Facing Acoustically transparent polyester
Diaphragmatic Membrane Loaded vinyl, 1.0 lbs. per square foot (4.88 Kg/m2)
Fabric Color Codes Black=00, Beige=03, Grey=08
Mounting Hardware Wall mounting cleat, wood screws and drywall anchors included.