isopad-flyouts

IsoPads were conceived to improve the accuracy of your studio monitors and home theater loudspeakers by minimizing the transfer of vibrations from loudspeakers to the structures supporting them. IsoPads are available in two profile shapes for horizontal and angled applications.

The IsoPlane system consists of 4 pieces of high density, low compression polyurethane foam, enough for two loudspeakers or two turntables. Each piece measures 12.75″ x 4.5″ with a maximum overall height of 1.5″. The IsoPlane is cut with a planar profile making it useful for isolating equipment that requires a level surface.

The IsoWedge system consists of 4 pieces of high density, low compression polyurethane foam, enough for two loudspeakers. Each piece measures 12.75″ x 4.5″ with a maximum overall height of 2″. The IsoWedge is cut with a 6° slope and is intended to accommodate monitors when placed on a tall meter bridge or low table top where the monitor speakers will need to be aimed down or up for the best on-axis positioning.

Core Material High density polyurethane foam
Density 1.8lbs per cubic foot (28.83 kg/m³)
Color Dark charcoal grey, UV resistant
Fire Rating Passes C117 California fire retardant test
Warning A. Do not cover ventilation openings with the IsoPads.
B. Do not place ISO Pads on top of equipment that radiates heat.
C. Do not place ISO Pads on surfaces that are smaller than the IsoPads.
D. Do not place top heavy or unbalanced loads on IsoPads.
E. Do not expose to open flame or excessive heat.
Notice Due to the nature of the material, slight variations in dimension and finish will occur but do not affect performance.