Telawall manual stages image 1

Telawall manual stages image 2

Telawall manual stages image 3

 


Telawall intro image 1
 

Thank you for your purchase of the Primacoustic TelaWall Fabric Track System. This product is ideal for large spaces where a custom color or pattern is needed.

The TelaWall Fabric Track System allows you to acoustically treat any commercial or residential space without sacrificing aesthetics, while maintaining a high level of effective sound absorption within the space. The system is comprised of three fully customizable components: high density glass wool panels that provide broadband acoustic absorption, a modular track system that is almost universally compatible with any surface, and a selection of stretch fabric available in a wide range of colors or in a printable option to apply unique graphics and logos.

Please take a few minutes to read through this manual before you begin installing TelaWall. Should you have any questions or comments, please feel free to contact us by email at info@primacoustic.com for a timely response.

  Telawall intro image 2




Tools Required



  • Utility Knife
  • Scissors
  • Sandpaper and/or File


Fabric Tucking Tools (available from Primacoustic)

 

  • TelaRocker
  • 5″ Finishing Spatula
  • 2″ Finishing Spatula



Telawall tools image 1

5″ Finishing Spatula | 2″ Finishing Spatula | TelaRocker



Track Cutting

 

  • 8″ or 10″ Miter Saw
  • Saw Blade should be “Ultra Thin” for cutting plastic, with 200 teeth per blade. Do not use a carbide tip saw blade, use a plywood blade.



Telawall tools image 2


Track Attachment

 

  • For attaching to drywall we recommend an 18 Ga. ¼” Crown Stapler.
  • If a stapler is not available the track can be screwed through the drywall into blocking, using pan head sheet metal screws every 1″-2″ max.
  • For attaching track to surfaces other than drywall your tool requirements will vary.



Telawall tools image 3



Plan the Space



It’s best to first draw out and plan how you want to design your TelaWall and have a plan for each section. Begin by striking the outer perimeter of the wall using a laser or level and tape measure.

After the outer perimeter has been marked, mark the mid-wall tracks that will be required to complete the design.



Telawall plan image 1



Telawall plan image 2

Telawall plan image 3

Telawall plan image 4



Cutting the Walltrack


After the plan has been laid out on the wall, its time to start cutting the tracks to match the design. A miter saw is required to make the angle cuts for the corners and joints for the perimeter and mid-wall tracks.

For the perimeter, measure each track that will be going the length of one section. For each corner, the appropriate angle cut must be made to make the joint look seamless. For squares a 45° angle will need to be cut, however any other shape and angle can be done. Just note the angle to ensure that all joints are connected tightly.

The Mid-wall track requires two 45° miter cuts to fit between two tracks.


Telawall Cutting the Walltrack image 3
  Telawall Cutting the Walltrack image 4

Telawall Cutting the Walltrack image 1

Mid-Wall

Telawall Cutting the Walltrack image 2

Perimeter


Telawall Cutting the Walltrack diagram 1
    Telawall Cutting the Walltrack diagram 2
Telawall Cutting the Walltrack diagram 3

Joining mid-wall tracks require all 4 points to be mitered to a triangle.



Pre-Wrap



Before attaching the outer perimeter track to the wall, you must first pre-wrap the outer tracks with fabric to create the seamless design between track and wrapped fabric.


 

PreWrap diagram 1

PreWrap diagram 2

PreWrap diagram 3


Telawall Pre-wrap image 1

1. For a 2″ frame, measure 6″ from the edge of the track to prepare a piece of fabric to wrap the outer track. For 1″ frame, measure 4″ fabric from the edge of the track.


Telawall Pre-wrap image 2

2. Carefully cut a straight edge to have a piece of fabric to attach the track.


Telawall Pre-wrap image 3

3. Spray adhesive to the side and bottom of the track. On a flat surface, lay the track down onto the fabric with the bottom face.




Telawall Pre-wrap image 4

4. Wrap the track with the fabric strip on the bottom and side edge. Tuck in the excess fabric into the channel.


Telawall Pre-wrap image 5

5. Trim the excess fabric.


Telawall Pre-wrap image 6

6. Re-tuck the excess fabric back into the channel to create a clean line.




Telawall Pre-wrap image 7

A finished perimeter track is now ready to be mounted to the wall.




Mounting the Tracks




Telawall Mounting the Tracks image 1

Telawall Mounting the Tracks image 2

Telawall Mounting the Tracks image 3



 

Now that the perimeter tracks have been pre-wrapped it is time to mount the track system on the wall. Start with a perimeter corner track and attach using staples or screws every 1″-2″ and shot at different angles to best affix the track onto the drywall. Each connecting perimeter track should be placed flush and without gaps to each other.

Perimeter tracks with an expected mid-wall track connection should leave ⅛″ spacing to allow for extra fabric and material.

Mid-wall tracks should be then placed in a similar fashion with staples or screws every 1″-2″, alternating sides of the track to secure properly.

When a 4 mid-wall tracks are coming to a point, leave 1/16″ gap between each track to allow for fabric.

Mounting the Tracks diagram 1
  Mounting the Tracks diagram 2
Mounting the Tracks diagram 3


Preparing the Acoustic Material




Telawall preparing acoustic material image 1

1. Prepare the acoustic material by first cutting to size for each section.


Telawall preparing acoustic material image 2

2. It is recommended to re-seal the exposed edge with an adhesive to prevent any glass wool from escaping.


Telawall preparing acoustic material image 3

3. Fit the acoustic panel into the frame, ideally it should be tight and hold in place on its own.




Telawall preparing acoustic material image 4

4. It is recommended to mark out stud locations and transfer to the panel to mark where to secure the panels with the mounting hardware.


Telawall preparing acoustic material image 5

5. Secure the panel to the wall with screw and washer.


Telawall preparing acoustic material image 6

6. Panel is now secured in place and is ready to be fabric wrapped.




Stretching the Fabric




Telawall stretching img1

1. Measure and cut the fabric to the first section. Cut 6-8″ wider and longer than the area to be covered. Take note of patterns and textures that should be straight with the panel.


Telawall stretching img2

2. Start at the top of the center of the track and tuck the fabric in both directions. There should be 2-3″ of extra fabric, leave this to be trimmed later.


Telawall stretching img3

3. Now tuck the bottom of the panel starting at the center and working your way to the edges.



Telawall stretching img4

4. Tuck the sides of the panel starting at the middle and working your way out, alternating on each side. Take care in the corners to ensure they will not rip.


Telawall stretching img5

5. After all edges are tucked, double check the pattern and weave to make sure they are in the correct orientation.


Telawall stretching img6

6. Use scissors to trim the edge of the fabric as close to the track as possible, be careful not to also cut the trucked fabric.



Telawall stretching img7

7. Tuck in the remaining fabric into the track to hide the recently trimmed fabric. Again take extra precaution tucking in at the corners.


Telawall stretching img8

8. Trim any loose threads and you now have a finished TelaWall Panel.


Telawall stretching img9

9. Repeat these steps for the remaining sections.