Z-Foam 12" Panel



12" w x 12" h x 3" d
(.3m x .3m)
Coverage = 24 sq. ft.
(7.3 sq. m.)
Order No. Z820 1018
Package of 24 Panels



Z-Foam 36" Panel



12" w x 36 " h x 3" d
(.3m x .91m)
Coverage = 36 sq. ft.
(10.9 sq. m.)
Order No. Z820 1020
Package of 12 Panels



Z-Foam 40 " Panel



12" w x 40 " h x 3" d
(.3m x .91m)
Coverage = 53 sq. ft. (16 sq. m.)
Order No. Z820 1022
Package of 16 Panels

Primacoustic Z-Foam introduces a new concept in anechoic wedge design by incorporating an innovative 'edge-frame' on every piece. This revolutionary concept makes installation much easier than with conventional foams and results in a much more professional look to the studio.

Two install approaches. Z-Foam panels on the left are staggered allowing some reflective area. Z-Foam panels on the right are joined in an wall array for maximum absorption. Wedge Trim Tiles are placed at the top and bottom of Z-Foam panels giving a "finished" look. Wedge Trim Tiles and Australis bass traps shown for reference only, not included with Z-Foam panels.

Made from high-density, open-cell acoustical foam, Z-Foam is 3” thick to provide effective mid and high frequency absorption (from 500Hz & up) and is embedded with a fire retardant to meet the strict California 117 code for worry-free, safe installation.

Available in a variety of sizes, Z-Foam is produced in a dark UV resistant charcoal color to reduce discoloration over time. It is ideally suited for control rooms, recording studios, on-air broadcast, post-production and rehearsal rooms where controlling the excessive reverberant field is required.

Z-Foam's edge-frame profile creates clean butt joints   Z-Foam may be combined with Wedge kits to create attractive stand-alone absorptive wall arrays.