Freeport™ Portable GoBo




[ Product index | Freeport Gobos | Freeport XT | Studio Examples | Control Room Examples ]
  Control Room Setups- Setups for Recording and Mixing
 
 

Stereo Monitoring
2 Freeport XT or SD Panels

Using just two Freeports, you can improve stereo imaging and widen your listening sweet spot by positioning them behind the monitors. Consider this the mandatory minimum treatment when the front wall is highly reflective.

 
 

Stereo Monitoring
4 Freeport XT or SD Panels

Four Freeports will begin to cut down flutter echoes between the front and back walls, and will tighten monitor imaging by absorbing radiation from the back of the loudspeaker. You will notice a larger sweet spot with consistent response.

 
 

Stereo Monitoring
4 Freeport XT or SD Panels

In highly reverberant environments, placing two Freeports behind you can create more intimacy. This will help you discern between the level of artificial ambiance coming from your monitors and the room ambiance.

 
 

Surround Monitoring
6 Freeport XT or SD Panels

Surround monitoring using six Freeports to control reflections and create a sweet spot. When mixing in surround, the rear loudspeakers produce artificial ambiance. Positioning panels behind all the loudspeakers help to achieve an accurate picture of surround effect.

 
 

Surround Monitoring
8 Freeport XT or SD Panels

Create a ‘room inside a room’ with eight Freeports for total control of your environment. Get all the benefits of front, side and rear control of reflections.

  [ Jump to recording examples ]  
| Home | Products | Reviews | Specifications | Room Acoustics | Contacts


Primacoustic is a division of JP CableTek Electronics Ltd. © 2004 Tel: 604.942.1001 | Fax: 604.942.1010